Kosin store tv projector

www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to install part number 39510 from Tekonsha. This is their Voyager Proportional Brake Controller. I am going to give you a few quick notes here. We are installing this on a 2008 Ford F150. It does not come with a tow package. It only comes with a basic 4 pole flat. We will show you how to upgrade this vehicle to do a 7 and 4 pole and install a brake controller. To give you a point of reference this is the factory 4 pole that came standard on the 2008 F150. Now if you had a tow package you would have the seven pole already out back here and probably the hitch also. But to convert this what we need to do is plug into that with our adapter. Then you extend the wire and you will splice into it wire harness here. This is the harness that comes from the front. I am going to take it apart to show you that this here is the blue wiring coming from the port from the front of the vehicle. If you look here this is where we are going to have to splice here to the other side of the connector. Because it does not go all the way through to the other side. So we will have to make our connection from the adapter and splice here. It is practically the only splice we will have to make underneath the vehicle. Next we are going to install the bracket on the bumper of the vehicle. Lets go ahead and install our adapter. While we are here we ...